DDLG in a Dual Discrete

Discuss Custom Shop devices

DDLG in a Dual Discrete

Postby RayBarbeeMusic » Wed Aug 10, 2011 2:02 am

Do these have the harmonics control now?
Barber Stuff: DD, DD mod board, DDLG, LTD, Half-Gainer, UnLimiTeD, Burn Unit EQ, Custom Cool, Tone Press, Launch Pad, Dirty Bomb
Amps: Ones I Mod, lots. Guitars: G&L, Gibson, Hamer, Ibanez, Misc others.
RayBarbeeMusic
 
Posts: 23
Joined: Tue Feb 16, 2010 12:58 pm
Location: Nashville

Re: DDLG in a Dual Discrete

Postby David Barber » Wed Aug 10, 2011 2:56 am

RayBarbeeMusic wrote:Do these have the harmonics control now?


One channel can, the other does not have the adjustment available.
PRS SE One, PRS SE EG, PRS McCarty rosewood neck, Anderson Hollow T, Anderson Hollow Classic, Hamer Artist, Fender Strats and Teles, All Barber Pedals, Barber Echelon, Barber Energy cab.
http://www.barberelectronics.com/sounds.html
http://www.barberelectronics.com/pickuptest.htm
http://www.barberelectronics.com
User avatar
David Barber
 
Posts: 566
Joined: Tue Apr 07, 2009 1:07 pm

Re: DDLG in a Dual Discrete

Postby RayBarbeeMusic » Wed Aug 10, 2011 9:38 pm

Would it be the "upper" board that sits over the tone pots, or the "lower" board that doesn't, that could have that control? Also, could either be set as "first in chain" or must the upper or lower always come first due to the design?

Thanks!
Barber Stuff: DD, DD mod board, DDLG, LTD, Half-Gainer, UnLimiTeD, Burn Unit EQ, Custom Cool, Tone Press, Launch Pad, Dirty Bomb
Amps: Ones I Mod, lots. Guitars: G&L, Gibson, Hamer, Ibanez, Misc others.
RayBarbeeMusic
 
Posts: 23
Joined: Tue Feb 16, 2010 12:58 pm
Location: Nashville

Re: DDLG in a Dual Discrete

Postby David Barber » Wed Aug 10, 2011 10:07 pm

RayBarbeeMusic wrote:Would it be the "upper" board that sits over the tone pots, or the "lower" board that doesn't, that could have that control? Also, could either be set as "first in chain" or must the upper or lower always come first due to the design?

Thanks!


The upper PCB gets the harmonics control. Either could be first in the chain, but depending on Ronni's conviction to a layout change, it might need to wait until I can draw him a new layout.
PRS SE One, PRS SE EG, PRS McCarty rosewood neck, Anderson Hollow T, Anderson Hollow Classic, Hamer Artist, Fender Strats and Teles, All Barber Pedals, Barber Echelon, Barber Energy cab.
http://www.barberelectronics.com/sounds.html
http://www.barberelectronics.com/pickuptest.htm
http://www.barberelectronics.com
User avatar
David Barber
 
Posts: 566
Joined: Tue Apr 07, 2009 1:07 pm


Return to B-Custom

Who is online

Users browsing this forum: No registered users and 1 guest

cron