"i got a Job" - features a DDSS and a Tone Press

Post and discuss sound clips made with Barber pedals and amps.

"i got a Job" - features a DDSS and a Tone Press

Postby gonzo-x » Mon Aug 24, 2009 12:37 pm

"i got a Job"

features a DDSS and a Tone Press

the tone press is used as a CLEAN Boost only, on the rhythm guitar track, into the cleaned-up lead channel of a mesa boogie markIIb 60w head.

also, the tone press is put into use on the BASS track, as a regular compressor.

the DDSS is used on the (2) solo guitar tracks, set at around NOON on tone and drive, about 3pm on VOL, into the lead channel of a mesa boogie markIIb 60w head.

link:

http://www.nowhereradio.com/artists/alb ... 02&alid=-1

you can download a 320kbps mp3 (best) or stream. choose hi fi stream, and select 'external player' on the media screen.
this is a working demo of a tune i'm in the middle of.



as much as i use the Tone Press as a clean boost, i really think it's high time i got a Launch Pad!
LOL
Last edited by gonzo-x on Tue Aug 25, 2009 10:32 am, edited 2 times in total.
Barber Katrina Relief DDSS, Barber Tone press, Carvin DC200K, Williams Special, USACG strat, '81 Mesa Boogie Mark IIb head, Avatar vintage cab w/Heritage g12h, Yamaha DG Stomp, asstd. other pedals
User avatar
gonzo-x
 
Posts: 66
Joined: Fri Aug 21, 2009 4:06 pm
Location: Salt Lake City, UT

Re: "i got a Job" - features a DDSS and a Tone Press

Postby gonzo-x » Mon Aug 24, 2009 1:39 pm

a pic of my guitar rig setup:

gtr rig-1-small.JPG
gtr rig-1-small.JPG (76.31 KiB) Viewed 6317 times



it's a Katrina Relief DDSS, Tone press, budda wah, planet waves strobe, fulltone mini deja vibe, isp decimator, dunlop brick;
'81 mesa boogie Mark IIB 60 watt head, Avatar Vintage closed back 1x12 with a Heritage celestion g12H;
Weber mass lite attenuator, Yamaha DG stomp effects in the boogie loop
Barber Katrina Relief DDSS, Barber Tone press, Carvin DC200K, Williams Special, USACG strat, '81 Mesa Boogie Mark IIb head, Avatar vintage cab w/Heritage g12h, Yamaha DG Stomp, asstd. other pedals
User avatar
gonzo-x
 
Posts: 66
Joined: Fri Aug 21, 2009 4:06 pm
Location: Salt Lake City, UT

Re: "i got a Job" - features a DDSS and a Tone Press

Postby David Barber » Mon Aug 24, 2009 2:56 pm

gonzo-x wrote:"i got a Job"

features a DDSS and a Tone Press

the tone press is used as a CLEAN Boost only, on the rhythm guitar track, into the cleaned-up lead channel of a mesa boogie markIIb 60w head.

also, the tone press is put into use on the BASS track, as a regular compressor.

the DDSS is used on the (2) solo guitar tracks, set at around NOON on tone and drive, about 3pm on drive, into the lead channel of a mesa boogie markIIb 60w head.

link:

http://www.nowhereradio.com/artists/alb ... 02&alid=-1

you can download a 320kbps mp3 (best) or stream. choose hi fi stream, and select 'external player' on the media screen.
this is a working demo of a tune i'm in the middle of.



as much as i use the Tone Press as a clean boost, i really think it's high time i got a Launch Pad!
LOL



Thanks for the clip Gonzo-X! Who says shred is dead? :D

Nice job!
PRS SE One, PRS SE EG, PRS McCarty rosewood neck, Anderson Hollow T, Anderson Hollow Classic, Hamer Artist, Fender Strats and Teles, All Barber Pedals, Barber Echelon, Barber Energy cab.
http://www.barberelectronics.com/sounds.html
http://www.barberelectronics.com/pickuptest.htm
http://www.barberelectronics.com
User avatar
David Barber
 
Posts: 566
Joined: Tue Apr 07, 2009 1:07 pm

Re: "i got a Job" - features a DDSS and a Tone Press

Postby mjcyates » Mon Aug 24, 2009 7:36 pm

Very cool! Guitar tones sound great! Thanks for sharing.
Musicman Silhouette, Reverend Warhawk, Fender Telecaster ('78), Fender Hot Rod Deluxe with Texas Heat, Blackheart Little Giant combo
Barber Tone Press, Barber Direct Drive, Barber Dirty Bomb, Barber LTD v1, Barber Barb EQ, Barber Tone Pump EQ, Garagetone Drivetrain, Nova Repeater, Ernie Ball Vp Jr., Korg Pitchblack
mjcyates
 
Posts: 81
Joined: Sun Apr 12, 2009 11:45 am
Location: Louisville, KY

Re: "i got a Job" - features a DDSS and a Tone Press

Postby gonzo-x » Thu Aug 27, 2009 1:04 pm

david-
thanks for listening!
and thanks again, for the wonderful products.
seeing as to how i bought one of your katrina relief pedals, and it was this time of the year, what, 4 years back?!! that katrina happened, it's heavy on my mind again.....
i used to live in new orleans, so it has a special place in my heart.
everytime i play thru my Barber DDSS, i think about it.
every time.




mjcyates-
appreciate you checking it out....
i'm working up a new version of this, with a different drum kit.
more of a vintage sound, rather than the modern sound..
just makes it sound fatter.

i'm also going to experiment with doing the rhythm tracks, playing thru ONLY the DDSS pedal, and running that into a Palmer PDI-09 direct box, straight to the recorder, and see what happens.
if that works out, i'll post the results.....
Barber Katrina Relief DDSS, Barber Tone press, Carvin DC200K, Williams Special, USACG strat, '81 Mesa Boogie Mark IIb head, Avatar vintage cab w/Heritage g12h, Yamaha DG Stomp, asstd. other pedals
User avatar
gonzo-x
 
Posts: 66
Joined: Fri Aug 21, 2009 4:06 pm
Location: Salt Lake City, UT

Re: "i got a Job" - features a DDSS and a Tone Press

Postby gonzo-x » Tue Sep 01, 2009 1:13 pm

here's the new finished song......



Waiting To Shine
by Bat's Brew

http://www.ourstage.com/tracks/ZBNKJYGG ... oplay=true


groovy shuffle hard rock-blues style
Barber Katrina Relief DDSS, Barber Tone press, Carvin DC200K, Williams Special, USACG strat, '81 Mesa Boogie Mark IIb head, Avatar vintage cab w/Heritage g12h, Yamaha DG Stomp, asstd. other pedals
User avatar
gonzo-x
 
Posts: 66
Joined: Fri Aug 21, 2009 4:06 pm
Location: Salt Lake City, UT


Return to Sounds of Barber

Who is online

Users browsing this forum: No registered users and 4 guests

cron