Resistor Value?

Discuss internal affairs of pedals, guitars, amps and components etc...
Not focused on DIY.

Resistor Value?

Postby RussB » Wed Jun 13, 2012 9:12 pm

This is a DDSS from '02. I had replaced the resistor circled with a 7.15k. I would like to return it to the stock value, but I can't remember what it was. David, can you help me out?


Image

Snow White Auto Wah > Tone Press > Octron > CC Hybrid > Aqua-Vibe > B-Buff > Dirty Bomb > Timmy v2 > Turbo Tuner > Carbon Copy > Quantum Leap > Flint - - -18 Watt TMB - - - JCM 800 - - - Single Recto
RussB
 
Posts: 57
Joined: Sat Apr 11, 2009 1:39 am
Location: connecticut

Re: Resistor Value?

Postby David Barber » Fri Jun 15, 2012 3:24 am

13.3K
PRS SE One, PRS SE EG, PRS McCarty rosewood neck, Anderson Hollow T, Anderson Hollow Classic, Hamer Artist, Fender Strats and Teles, All Barber Pedals, Barber Echelon, Barber Energy cab.
http://www.barberelectronics.com/sounds.html
http://www.barberelectronics.com/pickuptest.htm
http://www.barberelectronics.com
User avatar
David Barber
 
Posts: 562
Joined: Tue Apr 07, 2009 1:07 pm

Re: Resistor Value?

Postby RussB » Fri Jun 15, 2012 3:39 pm

Thanks! 8-)


I had tried to blow it up on the monitor, but the colors I was seeing was telling me it was a 223k :shock:

I knew that couldn't be right

Snow White Auto Wah > Tone Press > Octron > CC Hybrid > Aqua-Vibe > B-Buff > Dirty Bomb > Timmy v2 > Turbo Tuner > Carbon Copy > Quantum Leap > Flint - - -18 Watt TMB - - - JCM 800 - - - Single Recto
RussB
 
Posts: 57
Joined: Sat Apr 11, 2009 1:39 am
Location: connecticut

Re: Resistor Value?

Postby RussB » Sun Jun 17, 2012 12:21 pm

That didn't go well :cry:

Lifted the traces off the board. I can't tell where the resistor should connect to (unless I remove the board) I'm thinking at this point to jumper the resistor...but where does it connect?

Snow White Auto Wah > Tone Press > Octron > CC Hybrid > Aqua-Vibe > B-Buff > Dirty Bomb > Timmy v2 > Turbo Tuner > Carbon Copy > Quantum Leap > Flint - - -18 Watt TMB - - - JCM 800 - - - Single Recto
RussB
 
Posts: 57
Joined: Sat Apr 11, 2009 1:39 am
Location: connecticut

Re: Resistor Value?

Postby David Barber » Sun Jun 17, 2012 3:15 pm

RussB wrote:That didn't go well :cry:

Lifted the traces off the board. I can't tell where the resistor should connect to (unless I remove the board) I'm thinking at this point to jumper the resistor...but where does it connect?


Tack it to the pads of the .01 cap above it and pray to your favorite deity. :)
PRS SE One, PRS SE EG, PRS McCarty rosewood neck, Anderson Hollow T, Anderson Hollow Classic, Hamer Artist, Fender Strats and Teles, All Barber Pedals, Barber Echelon, Barber Energy cab.
http://www.barberelectronics.com/sounds.html
http://www.barberelectronics.com/pickuptest.htm
http://www.barberelectronics.com
User avatar
David Barber
 
Posts: 562
Joined: Tue Apr 07, 2009 1:07 pm

Re: Resistor Value?

Postby David Barber » Sun Jun 17, 2012 3:17 pm

Watch your tip heat if your pulling traces and pads, no need to go above 675f
Last edited by David Barber on Sun Jun 17, 2012 11:23 pm, edited 1 time in total.
PRS SE One, PRS SE EG, PRS McCarty rosewood neck, Anderson Hollow T, Anderson Hollow Classic, Hamer Artist, Fender Strats and Teles, All Barber Pedals, Barber Echelon, Barber Energy cab.
http://www.barberelectronics.com/sounds.html
http://www.barberelectronics.com/pickuptest.htm
http://www.barberelectronics.com
User avatar
David Barber
 
Posts: 562
Joined: Tue Apr 07, 2009 1:07 pm

Re: Resistor Value?

Postby RussB » Sun Jun 17, 2012 10:44 pm

Thanks for the help, David. The DDSS is back and sounding great again. I do regret ever messing with it in the first placethough...what was I thinking? :roll:

Snow White Auto Wah > Tone Press > Octron > CC Hybrid > Aqua-Vibe > B-Buff > Dirty Bomb > Timmy v2 > Turbo Tuner > Carbon Copy > Quantum Leap > Flint - - -18 Watt TMB - - - JCM 800 - - - Single Recto
RussB
 
Posts: 57
Joined: Sat Apr 11, 2009 1:39 am
Location: connecticut


Return to Nuts and Bolts

Who is online

Users browsing this forum: No registered users and 2 guests

cron