Can b-Buff be installed in a BJFE SBEQ?

Discuss Custom Shop devices

Can b-Buff be installed in a BJFE SBEQ?

Postby jonnyrocket » Thu Jul 07, 2011 12:01 am

Hi, I have a BJFE SBEQ pedal and would like to have a buffer inside it. The board inside the pedal is gooped, but the stomp switch is not. Do anybody know if the b-buff will fit? If so, would it change the sound of the pedal? I run the SBEQ at 18V. Would i still be able to do so with a b-buff installed?

I am including a pic.

Image
thanks!
Guitar: Strat (SD Classic Stack+), PRS SC 250 (Pearly Gates), LP Studio (SD Jazz & Pearly Gates), Duo Sonic (SD SSL-1 & Twangbanger), Taylor 314ce
Effects: Tone Press, Ltd, DD Mod, Unlimited, Barb EQ, Cusack Screamer, Hotcake, BB Deluxe, HBOD, EGDM, SBEQ, Deep Blue Delay, Zendrive, Hellbender, Fuzz Factory, RMC3, Solemate, DLS, Formula 5, WIIO
Amp: Valvetrain 205 Tallboy (12' Eminence Blue Tick Hound)
jonnyrocket
 
Posts: 6
Joined: Tue Aug 31, 2010 4:31 pm

Re: Can b-Buff be installed in a BJFE SBEQ?

Postby David Barber » Thu Jul 07, 2011 9:41 pm

That looks like it will fit, and I can see access. The B-Buff runs on 9vdc, and no more and then it pumps the dc up for higher headroom. A little known fact of the B-Buff is that it has an access to supply the increased voltage to the host pedal. This means if your pedal does not have heavy current draw, you can apply 9vdc and run the whole shabang from the B-Buff power...so, can the BJFE handle 24vdc?
PRS SE One, PRS SE EG, PRS McCarty rosewood neck, Anderson Hollow T, Anderson Hollow Classic, Hamer Artist, Fender Strats and Teles, All Barber Pedals, Barber Echelon, Barber Energy cab.
http://www.barberelectronics.com/sounds.html
http://www.barberelectronics.com/pickuptest.htm
http://www.barberelectronics.com
User avatar
David Barber
 
Posts: 566
Joined: Tue Apr 07, 2009 1:07 pm

Re: Can b-Buff be installed in a BJFE SBEQ?

Postby jonnyrocket » Sun Jul 10, 2011 11:36 pm

David, thanks so much for your response.

I think the SBEQ can’t handle 24 Volts. I think my best bet is to get a b-buff and install it separately on a small enclosure.

Thanks again!
Jon
Guitar: Strat (SD Classic Stack+), PRS SC 250 (Pearly Gates), LP Studio (SD Jazz & Pearly Gates), Duo Sonic (SD SSL-1 & Twangbanger), Taylor 314ce
Effects: Tone Press, Ltd, DD Mod, Unlimited, Barb EQ, Cusack Screamer, Hotcake, BB Deluxe, HBOD, EGDM, SBEQ, Deep Blue Delay, Zendrive, Hellbender, Fuzz Factory, RMC3, Solemate, DLS, Formula 5, WIIO
Amp: Valvetrain 205 Tallboy (12' Eminence Blue Tick Hound)
jonnyrocket
 
Posts: 6
Joined: Tue Aug 31, 2010 4:31 pm


Return to B-Custom

Who is online

Users browsing this forum: No registered users and 1 guest