Sounds! recording clip info

LTD with stock Anderson classic (strat) with hollow swamp ash body, solid maple neck and Tom's excellent vintage style strat PU, into a Barber Echelon setup with EL34 output tubes, sovtek 12ax7, set to sweet EQ and vintage gain structure, Barber speaker cab with Eminence V12 speaker...and 50' of George L cable!

Here are short sample for the above rig for those who have slow web connections.

Axis (Jimi style) ------Double stops ------Electric blues lead ------Texas style

 

LTD with Hamer mahogany Vangaurd using Duncan Seth Lover PU,into a Barber Echelon setup with EL34 output tubes, sovtek 12ax7, set to sweet EQ and vintage gain structure, Barber speaker cab with Eminence V12 speaker...and 50' of George L cable!

LTD Shuffle Uses same Hamer setup as above.Chris Sellman plays bass, drums are a simple loop.

 

New Direct Drive with Hamer mahogany Vangaurd using Duncan Seth Lover PU,into a Barber Echelon setup with EL34 output tubes, sovtek 12ax7, set to sweet EQ and vintage gain structure, Barber speaker cab with Eminence V12 speaker...and 50' of George L cable!

 

Burn Unit EQ & Small Fry (Small Fry is based on the Burn Unit)

Here are some clips of the Burn Unit EQ with different settings going between an Anderson Hollow classic and a Hamer Vangaurd, all Echelon settings are the same as the above settings. Tone on the Burn Unit is set fairly high on all clips, internal trims are at factory settings.

Anderson bridge, hi Burn setting with med dynamics settings.

Anderson,med burn and med dynamics bridge and middle PU

Anderson, med burn and dynamics neck PU

Hamer, med burn and dynamics, same riff played three times, going from bridge PU, to both, neck PU

Hamer, hi Burn and low dynamics, bridge PU

Hamer, hi burn, low dynamics, bridge PU

Hamer,hi burn, low dynamics bridge PU

Hamer, very low burn, med dynamics bridge PU

Hamer,hi burn, med low dynamics bridge PU

Hamer, hi burn, low dynamics bridge PU

Tone Press

For these files we used an Tom Anderson Hollow T with Rosewood fingerboard and John Suhr PU.

The Barber Echelon is set the same as all the other pedal sound files (dead clean).

Blend 3 o clock, sustain 3 o clock, bridge and neck. played quite hard!

Blend 12 o clock, sustain 3 o clock, neck PU

Blend 1 o clock, sustain 2 o clock, bridge and neck PU

Blend 11 o clock, sustain 10 o clock, Neck PU

Blend 1 o clock, sustain 1 o clock, Craig Schwartz playing a Suhr Classic with V60LP neck/middle PU

 

More sounds made with Barber gear!