Barber Electronics forum.

Discuss Barber products

Skip to content

Tube based Barber?

Discuss standard production effect pedals
Post a reply

Re: Tube based Barber?

Postby Ronni » Thu Jun 11, 2009 1:06 am

Well we thought we had something.. But it went Whoosh Bamp...not whoosh whoosh..back to the drawing board. :(
G&L Legacy Special, PRS SE soapbar II, beefed up PV Classic50 4X10, Barber pedals, Budda Wah , Line6 green/blue F/X.
Then a bunch of studio stuff.
Tunes: http://www.bigbangaudio.com//MP3/johnnylaw_tunes/JL_covers.html

http://www.barberelectronics.com

http://www.myspace.com/bigbangstudios
User avatar
Ronni
 
Posts: 94
Joined: Tue Apr 07, 2009 11:08 am
Location: Baltimore
Top

Re: Tube based Barber?

Postby Jules-RM » Thu Jun 11, 2009 1:18 am

:idea: What I haven't seen is a stereo parallel flanger/phaser pedal.
User avatar
Jules-RM
 
Posts: 56
Joined: Thu Apr 30, 2009 2:56 am
Top

Re: Tube based Barber?

Postby Jerich » Wed Jul 15, 2009 6:18 pm

you know I have said it before David..we need a Barber Delay...something with effects loop in it and analog timing with digital delays/echoes....OOooo...i am hot for it I collect delays and Barber needs one..Forget about the wah every company out there makes em'..wah ugg...
7 string guitar->zaolla cables->axess BS-2a->Pigtronix Philophers tone->Radial Loop Trifecta,Dirty Bomb, tech 21 DLA,Pigtronics Echolution"->GXC Switcher with 8 loops,1-Digitech DL-8,2-Boss-dd-3,3-DD-7,4-Barber 1/2gainer,5-ISP decimator,6-ilb Violin Fuzz,7-eventide pitchfactor,8-Brunetti Burning pedal,->AMP Brunetti evo120xl
Jerich
 
Posts: 7
Joined: Fri Apr 17, 2009 2:23 pm
Location: Folsom PA
Top

Re: Tube based Barber?

Postby David Barber » Wed Jul 15, 2009 6:35 pm

Jerich wrote:you know I have said it before David..we need a Barber Delay...something with effects loop in it and analog timing with digital delays/echoes....OOooo...i am hot for it I collect delays and Barber needs one..Forget about the wah every company out there makes em'..wah ugg...

Wow, you really are going to be disappointed IF we ever do make a delay. :D
PRS SE One, PRS SE EG, PRS McCarty rosewood neck, Anderson Hollow T, Anderson Hollow Classic, Hamer Artist, Fender Strats and Teles, All Barber Pedals, Barber Echelon, Barber Energy cab.
http://www.barberelectronics.com/sounds.html
http://www.barberelectronics.com/pickuptest.htm
http://www.barberelectronics.com
User avatar
David Barber
 
Posts: 566
Joined: Tue Apr 07, 2009 1:07 pm
Top

Re: Tube based Barber?

Postby David Barber » Wed Jul 15, 2009 6:36 pm

What is "analog timing"?
PRS SE One, PRS SE EG, PRS McCarty rosewood neck, Anderson Hollow T, Anderson Hollow Classic, Hamer Artist, Fender Strats and Teles, All Barber Pedals, Barber Echelon, Barber Energy cab.
http://www.barberelectronics.com/sounds.html
http://www.barberelectronics.com/pickuptest.htm
http://www.barberelectronics.com
User avatar
David Barber
 
Posts: 566
Joined: Tue Apr 07, 2009 1:07 pm
Top

Re: Tube based Barber?

Postby Ronni » Wed Jul 15, 2009 7:19 pm

David Barber wrote:What is "analog timing"?


It's that old type of watch..You know the one you have to wind up the little dial. :roll:
G&L Legacy Special, PRS SE soapbar II, beefed up PV Classic50 4X10, Barber pedals, Budda Wah , Line6 green/blue F/X.
Then a bunch of studio stuff.
Tunes: http://www.bigbangaudio.com//MP3/johnnylaw_tunes/JL_covers.html

http://www.barberelectronics.com

http://www.myspace.com/bigbangstudios
User avatar
Ronni
 
Posts: 94
Joined: Tue Apr 07, 2009 11:08 am
Location: Baltimore
Top
Previous
Post a reply

Return to Barber pedals

Who is online

Users browsing this forum: No registered users and 15 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group